12" - 1-1/4" x schedule 40 PVC pipe
1 ea.- 1-1/4" PVC threaded plug
1 ea - 1-1/4" PVC coupling (Threaded X glue fitting)
1 ea - 1/4" x 1" stainless bolt
1 ea - 1/4" Nylock nut
2 ea - Fender Washers
Optional: PVC cement
Rod holder may be positioned either behind or foreword of seat. In either case, it should be positioned so that during normal paddling, it is beyond of the swing of the paddle shaft. Drill 5/16 hole centered in the base of the threaded plug.
Drill 5/16 hole in kayak at mounting point. Insert bolt and washer inside plug and then through the hole in the kayak. Tighten nut snugly. Insert length of PVC pipe into coupling (gluing is optional.) If you glue the pipe, wait until after the glue is dry before threading pipe coupling onto plug (base.) Tether the fishing rod to your kayak to reduce the risk if loss.