INSTRUCTIONS:
Rod holder may be positioned either behind or
foreword of seat. In either case, it should be
positioned so that during normal paddling, it is
beyond of the swing of the paddle shaft. Drill 5/16
hole centered in the base of the threaded plug.
Drill 5/16 hole in kayak at mounting point. Insert
bolt and washer inside plug and then through the hole
in the kayak. Tighten nut snugly. Insert length of
PVC pipe into coupling (gluing is optional.) If you
glue the pipe, wait until after the glue is dry
before threading pipe coupling onto plug (base.)
Tether the fishing rod to your kayak to reduce the
risk if loss.
